Carbon Fiber Sample Probe, Blue Band 0.5 mm I.D. for S20 Autosampler

Carbon Probe, 0.5mm ID (Blue)_1747213804308
Replacement 0.5 mm I.D. carbon fiber sample probe (blue band) for the PerkinElmer S20 Series autosampler — the standard probe supplied with every S20.
Part Number :
N0777547
Unit Price :
$553.14

This is the standard sample probe for the PerkinElmer S20 Series autosampler, supplied with every S20 system. The 0.5 mm inside diameter is the recommended bore for ICP-MS, including NexION systems, and suits routine aqueous samples; the blue band identifies the bore at a glance so it’s easy to distinguish from the 0.8 mm (red band) and 1.0 mm (2 × blue band) S20 probes. Keep a spare on hand to avoid downtime from a bent, blocked, or worn probe.


The FEP-covered carbon fiber body is rigid and resists bending, so the probe stays accurately positioned across long runs. The probe ships with 2.74 m (108 in) of PFA sample capillary already attached, ready to connect to the instrument’s sample introduction system, and all wetted surfaces are inert fluoropolymer, so it handles a wide range of sample matrices including acid digests.


The probe mounts directly to the current S20 Z-drive with two probe clamps; no guide plate is required. On S20 systems with the earlier Z-drive, fit the guide plate before use.


  • Inside diameter: 0.5 mm (blue band) — recommended for ICP-MS
  • Probe body: FEP-covered carbon fiber, 25.4 cm (10 in)
  • Capillary: PFA, 2.74 m (108 in), attached
  • Wetted surfaces: PFA / FEP (inert fluoropolymer)
  • Compatibility: PerkinElmer S20 Series autosamplers